SC4 Devotion Forum Archives

SimCity 4 General Discussion and Tutorials => SimCity 4 General Discussion => Topic started by: alan_vzla on November 15, 2008, 06:22:21 PM

Title: Noob with problems: Problems with Maxis Buildings
Post by: alan_vzla on November 15, 2008, 06:22:21 PM
I don't know if this theme has been discussed but I have a problem with Maxis buildings and Lots, he problem is the following:
1. Some props don't appera, when I go to LE to see why this happens, I found that the props are called "unnamed"
2. On the buildings and lots, the textures are screwed up, sometimes it's ok and sometimes only the base texture appears.

Please, any help, explanation or soultion is welcomed. thanks in advance

Alan
Title: Re: Noob with problems: Problems with Maxis Buildings
Post by: The_Hutt on November 15, 2008, 06:43:06 PM
Are your graphic settings set to high? Otherwise you can get bare lots and such.
Title: Re: Noob with problems: Problems with Maxis Buildings
Post by: alan_vzla on November 16, 2008, 06:37:30 PM
Yes, they're high.. besides it can't be the cause because it only happens to Maxis buildings and lots... all the custom content is Ok
Title: Re: Noob with problems: Problems with Maxis Buildings
Post by: jmyers2043 on November 16, 2008, 07:30:46 PM
Hello Alan_vzla

Try this thread. Sounds like you may have the prop pox.

I had a similar problem once in my own game. It only affected Maxis R$ homes. It happened in a small section of the city. I discovered it after a saved game when I went back to that city a week later. I merely bulldozed the affected neighbhorhoods and the homes grew back normally.

http://sc4devotion.com/forums/index.php?topic=1201.0 (http://sc4devotion.com/forums/index.php?topic=1201.0)