Hi all, I would like to build a four lane avenue downtown. Two lanes going one way and two going the other with a divider in between. The only way I can see to do this is to use two one way streets on one side of the divider and two one way streets on the other. However is this just a waste of space since I assume only one of the one way streets will typically have the traffic and the other will be just idle. Traffic can't move from one to other I am assuming. Am I in fact looking at this correctly or am I missing something? The forest for the trees so to speak. Using two avenues will just split each half apart, having each street alternating which direction it is going. Is there another way to build a four lane avenue as described above? Any ideas would be appreciated? Thanks one and all, Steve
what you can do is the following
drag 2 avenues side by side
then choose the rail tool, and drag over the left side of the right avenue ( starting one tile before and ending one tile after the avenue ), do the same on the right side of the left avenue
then bulldoze the rails and build an avenue in the middle
Ascii art:
Step 1 : 2 avenues
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
Step2 : drag railway
<<<<<<<<<<<<<<<<<<<<<<<<
--------------------------------
--------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>
Step3 : bulldoze
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
Step4 : build an avenue
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
just notice you want a divider, the above steps can be repeated to give the effect you want
Step 5 : drag rail over
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
--------------------------------
--------------------------------
Step 6 : build an avenue
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
--------------------------------
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
Step 7 : build a rail again
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
--------------------------------
--------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>
Step 8 : bulldoze rails
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
Step 9: build avenue in the empty space
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
Step 10: build a rail in the middle
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
--------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
Step 11 : bulldoze the rail
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
Step 12 : plop your divider
<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<
++++++++++++++++++++++++++
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
Hope it helps
You never fail to amaze. It worked dead on. Thanks again for your timely response and help. Steve