I was wondering if there is a way to connect on-slope rail with el-rail?
Here's my situation:
(https://www.sc4devotion.com/forums/proxy.php?request=http%3A%2F%2Fi705.photobucket.com%2Falbums%2Fww55%2Fanonymson%2Felrailtorail.jpg&hash=2b49bee0c695f147b169958cb78471a8e45987b4)
- riiga
No not really, you should use GLR instead. Because Rail and El-Rail are 2 different network, and transit types it would need a TE lot to convert between the two.
Jonathan
Quote from: Jonathan on December 13, 2009, 12:36:13 PM
No not really, you should use GLR instead. Because Rail and El-Rail are 2 different network, and transit types it would need a TE lot to convert between the two.
Jonathan
Well, GLR isn't a viable option since this is for long distance travel. &mmm
(https://www.sc4devotion.com/forums/proxy.php?request=http%3A%2F%2Fi705.photobucket.com%2Falbums%2Fww55%2Fanonymson%2Fth_oversiktjarnvag.jpg&hash=e4f794834c647494b18e77b025d1b23cba77965c) (http://i705.photobucket.com/albums/ww55/anonymson/oversiktjarnvag.jpg?t=1260737323)
(click for full resolution)- riiga
Simply use the elevated viaduct rail, as you did for the two road bridges ...
To get a neighbor connection, create a neighbor connection with normal rail and place the viaduct pieces on top of the rail
Jonathan
Quote from: Chrisim on December 13, 2009, 12:51:54 PM
Simply use the elevated viaduct rail, as you did for the two road bridges ...
Quote from: Jonathan on December 13, 2009, 12:53:20 PM
To get a neighbor connection, create a neighbor connection with normal rail and place the viaduct pieces on top of the rail
Jonathan
Yes, I already know that, but in this case I didn't want to use any of these options. But since there obviously exists no other option, I guess I'll have to use normal rail and place a el-rail/rail station on the other side. Thanks anyway!
- riiga