• Welcome to SC4 Devotion Forum Archives.
 

News:

The SC4 Devotion Forums are no longer active, but remain online in an archived, read-only "museum" state.  It is not possible for regular members to post or use the private messaging system, and no technical support will be provided for any issues pertaining to the forums in their current state.  Attachments (those that still work) are accessible without login.

The LEX has been replaced with SC4Evermore (SC4E), and SC4E maintains an active Discord server.  For traditional forums, we recommend Simtropolis.

Main Menu

RHW 6C smooth curve problems

Started by esto, October 22, 2011, 05:02:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

esto

October 22, 2011, 05:02:47 PM
Why can I never fill the last block? - getting "unsuitable grade for construction" error

JamesSanner

#1
October 22, 2011, 05:45:08 PM
This is a very good question. Usually to solve this I have to draw out the diagonal segment out far enough for a 6C starter piece to "take", then destroy the starter (and the straight segment you need to connect it) and redraw the diagonal.

bthersh

#2
October 23, 2011, 05:24:27 AM
Was the area completely flat before you started construction?  If a puzzle piece is built on uneven terrain, it sometimes makes it impossible to build next to parts of it.

mike3775

#3
October 23, 2011, 07:06:16 AM
I have found with RHW, its easiest to just do the road flattening trick out 3-5 squares from the RHW(or I also use Peg's leveler), this way it avoids the issues you are having, and then when done laying out the highway, I go back and re-level the ground to match what was leveled

esto

#4
October 29, 2011, 07:07:17 PM
What worked was leveling the entire area - which is a must for most NAM/RHW projects.
Print
Go Up Pages1
User actions