• Welcome to SC4 Devotion Forum Archives.
 

News:

The SC4 Devotion Forums are no longer active, but remain online in an archived, read-only "museum" state.  It is not possible for regular members to post or use the private messaging system, and no technical support will be provided for any issues pertaining to the forums in their current state.  Attachments (those that still work) are accessible without login.

The LEX has been replaced with SC4Evermore (SC4E), and SC4E maintains an active Discord server.  For traditional forums, we recommend Simtropolis.

Main Menu

CAM - General Discussions

Started by RippleJet, May 01, 2007, 01:35:47 PM

Previous topic - Next topic

0 Members and 5 Guests are viewing this topic.

bendy

Quote from: BarbyW on July 29, 2007, 11:40:10 PM
Eventually all simgoober and CSX farms will be updated but at the moment they are already CAMpatible in that they will grow with CAM in plugins. There are currently no SG or CSX farms over stage 3 so that will need to be looked at. I am waiting to hear from SG and will do some updating when I know how he wants it doing.

Thanks Barby. I figured that the existing farms would be CAMpatible in that they will work in their current stages. However I'm currently setting up a new plugins directory for a fresh start when the CAM is released and am keeping it CAM only. So I will avoid those farms for now.

Another question (I'll run out of them eventually I'm sure), is the CAM compatible with GrampaAls Prevent IR Lots mod? It's not listed in the README however many other maxis growable blockers are. If it is incompatible will the CAM be able to block these itself?

Thanks again

bendy


BarbyW

GrampaAl's Prevent IR mod is included in the BSC No Maxis set from the LEX. This is CAMpatible providing it loads after CAM so I have the set in a ZZZ_ folder in plugins.
Inside every old person is a young person wondering what happened. TP



Barbypedia: More alive than the original

bendy

Kool! Thanks Barby.

And now back to the waiting.......  ;) Well, and the dependancy downloading and installing.....  $%Grinno$%

Diggis

I've downloaded and read quickly the manual.  I must say it's so well written, I almost understood it.  :P

Great work on this guys.

BarbyW

Considering it it written by a Finn in English it is extremely well written and I gave it to my husband, who knows nothing about SC4, who declared it to be very  understandable.
The countdown begins ;D
Inside every old person is a young person wondering what happened. TP



Barbypedia: More alive than the original

Bluebeard

Aside from a ton of numbers the Guide is very well written.So should someone wait to download other stuff before CAM or Can Cam come later?.Thanx
    Bottom line is a clean slate the best thing for this Mod?. :thumbsup:

BarbyW

Depends what you want, BB, as there are not a lot of CAMeLots yet so you will need to grow Maxis stuff. If you want custom content then get all the ones you want plus all the CAMeLots etc but for the CAMeLot buildings don't keep the old lots - just the models as per the list on an earlier page in this thread. Any other custom lots that are stage 7 or below can be kept as they will just grow normally as will the farms.
Inside every old person is a young person wondering what happened. TP



Barbypedia: More alive than the original

Bluebeard


Diggis

Quote from: BarbyW on July 31, 2007, 04:45:57 AM
Considering it it written by a Finn in English it is extremely well written and I gave it to my husband, who knows nothing about SC4, who declared it to be very  understandable.
The countdown begins ;D

How did he feel about you going away with all these good looking blokes to the BSC weekend?   $%Grinno$%

shoreman905

Ahh but the BSC is the most honorable of associations. What worries could he have had?

BarbyW

IT'S THE FINAL COUNTDOWN. GET READY. NEARLY THERE. ;D
Inside every old person is a young person wondering what happened. TP



Barbypedia: More alive than the original

mightygoose

what, we talking hours minutes or days here????
NAM + CAM + RAM + SAM, that's how I roll....

BarbyW

Inside every old person is a young person wondering what happened. TP



Barbypedia: More alive than the original

Bluebeard

Goddess your such as tease and we love you for it. :thumbsup:

mightygoose

NAM + CAM + RAM + SAM, that's how I roll....

RippleJet

#375
I had to wait for Barby's previous message before I could press the upload button.
So the release was delayed for half a minute... :D

Diggis


BruceAtkinson

...July 31st, 2007 will mark an exciting day for SimCity fans from all over the world as the release of the CAM is now official!!  Congratulations to Ripplejet, BarbyW and all of the other talented individuals that have blessed us with this mighty MOD.....
    As some of you have already read from me, both here and in Simtropolis, I am constantly amazed at the Talent that is present within the SimCity communities.  Not being a modder or batter....I have benefitted enourmously with the models and creations available to us through the hard work of these individuals!  Thanks to you all, my SimCity gaming experience is constantly enriched on a daily basis!
    Part of my professional existence is seeking out and promoting Talent, mostly in the Music and Broadcast Industries....so recognising Talent is very important to me.  I hope that those 'powers to be' from Maxis/EA Games recognisies the enourmous Talent within our SimCity Communities and enlists their talent for furture development of the Simcity franchise......
   Again, congratulations to all who have contributed to the CAM Add-on, and to all who have created the numerous and wonderous models and bats we have come to enjoy!!
 &apls
 Bruce

Bluebeard

Yes I agree this is a historical day for the SC community.But as we all know what would history be without a few village idots.
    So is there a support thread yet for this awesome Mod because a village idot is need of support.Thanx

mightygoose

as soon as anything is idoitproof someone invents a better idiot, but remember installing the CAM as a whole package which i am now doing, is quite a complex business... ensuring i get everything.
NAM + CAM + RAM + SAM, that's how I roll....