• Welcome to SC4 Devotion Forum Archives.
 

News:

The SC4 Devotion Forums are no longer active, but remain online in an archived, read-only "museum" state.  It is not possible for regular members to post or use the private messaging system, and no technical support will be provided for any issues pertaining to the forums in their current state.  Attachments (those that still work) are accessible without login.

The LEX has been replaced with SC4Evermore (SC4E), and SC4E maintains an active Discord server.  For traditional forums, we recommend Simtropolis.

Main Menu

Hole digging lots won't work.

Started by katyperry, June 16, 2011, 11:16:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

katyperry

June 16, 2011, 11:16:32 AM
In one of my cities, I am planning on building a RHW-4 network that connects downtown and a proposed residential area. However, I am planning to underpass the existing road using hole-digger lots I downloaded from Simtropolis. Whenever I drag the road over the lot, it doesn't dig the hole like it's supposed to. Just turns to red saying "Unsuitable grade for construction".

Exla357

#1
June 16, 2011, 11:36:28 AM
You have to make sure everything is perfectly flat. Use single road tiles to level out the area then try again.

Diggis

#2
June 16, 2011, 02:12:01 PM
It's more likely that the result of the digging would take it below water level which won't work.

katyperry

#3
June 17, 2011, 09:06:56 AM
I tried using a Flexible UnderPass (underground road under avenue, since the RHW didn't work) but after a while, the whole game went to a CTD. I was absolutely furious. Just so you know...
Print
Go Up Pages1
User actions