High Speed Rail Project (HSRP)

[drewpics]

Just wondering if there's been any development on a diagonal on-slope and off-slope for the HSR? Its the one thing preventing me from using the mod.

[APSMS]

I doubt there's been anything recently; I was wondering, since I hadn't seen them, if any WRC had ever been made for the HSRP, or if the BTM was the only way to accomplish these.

[z]

It's been quite a while since anything new has been done for the HSRP.  However, as far as the WRCs go, when the BTM ones were made, versions were made for plain monorail as well.

[awds520]

NAM32 NO contrast？

[Tarkus]

NAM32 NO contrast？

HSRP isn't in active development anymore.  There have been no significant updates to the system since its initial release during the NAM 23 cycle.

-Alex

[vinlabsc3k]

NAM32 NO contrast？

If you want link the unlinked side, demolish 2 tile, place the filler in the correct rotation, demolish the last piece, drag the Monorail/HSR and it's done.

[Crimsonsky80]

So the HSR has been replaced by what?

[Glazert]

It hasn't been replaced. No-one said it had.

[Crimsonsky80]

Sorry. Probably I have incorectly put my question. 
I ment, I have read in the previous posts that its development has been halted. So I was thinking if it was in relation to something newer and better has replaced it.


P.S. Why I have to Always reply to verification questions? It's really frustrating....

[jdenm8]

Simply put, the people working on it got it to a state they were satisfied with and moved onto other projects.

If you're after a HSR-like system, Moonlight's Shinkansen Mod (Included in the NAM Installer, don't remember what we labelled as) is a very nice modern interpretation. It does not have a ground variant though and is not an override, it completely replaces the Monorail network.

Also, answering the verification questions on your first couple of posts is an anti-spam measure. It'll go away after a time/number of posts.

[eugenelavery]

Unfortunately Shinkansen's mod's are not fully compatible with NAM. They are however very good mod's nonetheless.

[CahosRahneVeloza]

Unfortunately Shinkansen's mod's are not fully compatible with NAM. They are however very good mod's nonetheless.

You're probably thinking of a different mod as Moonlight's Shinkansen mod has been fully integrated into NAM32. It's what you'd get if you selected the "Alternate Monorail" implementation from NAM32's install process.

[eugenelavery]

By compatible, I mean the textures of the mod get lost when it intersects with RHW networks, it reverts back to Maxis monorail.

[CahosRahneVeloza]

By compatible, I mean the textures of the mod get lost when it intersects with RHW networks, it reverts back to Maxis monorail.

Well there is that 

[Crimsonsky80]

Simply put, the people working on it got it to a state they were satisfied with and moved onto other projects.

If you're after a HSR-like system, Moonlight's Shinkansen Mod (Included in the NAM Installer, don't remember what we labelled as) is a very nice modern interpretation. It does not have a ground variant though and is not an override, it completely replaces the Monorail network.

Also, answering the verification questions on your first couple of posts is an anti-spam measure. It'll go away after a time/number of posts.

Thx alot for the anwer. So you suggest the Moonlight's mod?
I was trying to have all separated as when I install NAM it's very difficult to navigate through that enormous amount of mods.

[CahosRahneVeloza]

I was trying to have all separated as when I install NAM it's very difficult to navigate through that enormous amount of mods.

I've got to agree with you on this one, the font sized used on the installer (the one used on the section where you select which options you want) is a tad bit small & it was hard on someone like me who has poor vision.

[Patroklos]

Does anyone happen to know the height of the elevated HSR tracks? I don't have the tools installed to check it currently.

[APSMS]

The HSRP is essentially a starter-based override of the monorail network. Default elevated network height should be 15 meters. You can use the El-Rail, Viaduct Rail, and Elevated Road & RHW viaducts to compare.

[noahclem]

It should make a difference for most purposes but it's height is actually 15.5m.

[Patroklos]

That's what I figured. I am working on a  rail station and wanted the model to be comparable with various elevated options as I am not sure which ones I will actually be able to get to work with it. Given how out of date HSR is I probably won't be able to support that one, but since its the same height anyway why not leave that option open!