Looking for a dependency

[irelandeb]

http://www.simtropolis.com/stex/details.cfm?id=19019

I downloaded that building (and the 3 otehr similar blocks by the same creator), but when it builds in my cities the ground beneath it disappears and you can see right through to the backround.

I am assuming I am missing a dependency, but the creator doesn't mention any depencies. Does anyone know what I might need?

I have the meadowshire terrain mod, could that be affecting it?

[mtg]

you could try to run your city without the terrain mod, if it still gives you problems pm the creator.

[BarbyW]

The creator omitted the textures as dependencies:
BSC MEGA Textures Vol01
BSC MEGA Textures Vol02

[irelandeb]

thanks a lot 

how do I add rep on this site?

[AKPSV]

Hello,

Hello,
missing props

I hope you can help me. I am looking for these Lots "GE Freight Station, Kralore Freight V2 and Large Rail Yard"  following props.
Missing Props:
0x00300-403, -408, -3D4, -3D6, -3D8, - 3D9, -3DA, -3DB, -3EA; 0x0D7633A9, 0x0D6E359D;
pDumpDuel 0x6534284a-0x2D3538EF-0x0D7633A9.sc4desc
platform 0x6534284a-0xCD6D0C07-0x0D6E359D.sc4desc

All other dependencies exist

In what packege can I find them?

Thanks

[BarbyW]

I cannot wait 30 mins to download this file from the STEX but this is his description:

A conflict was discovered between Trolca's Original Replacement Engines/Cabooses and Gizmo's Maxis Train Car Props.dat. So I have redone the Simcity Rail lot. It now uses Gizmo's ST-Member-TrainCarProps-V8.dat. While I was at it, I fixed a few other graphical things on both lots. (Pretty much just moved some props around). I have also changed the screenshot above to show the CP Rail Query. Just overwrite the old dat files with these new ones. ------------------------------------------------------------------- Both lots can be used separately or at the same time. Both lots are Transit Enabled and require Rush Hour. The CP Rail station has a custom query and uses CP Rail train car props. The Simcity Rail station uses the standard freight query and ST-Member-TrainCarProps-V8. Both stations use the defaults for monthly cost. (10 monthly cost,) Capacity is 4,000 tons. Dependancies -------------------- CPRail-TrainCarProps-V1.dat (For CP Rail Station) http://gizmo.lunarpages.com/ ST-Member-TrainCarProps-V8.dat (For SC4 Rail Station) http://gizmo.lunarpages.com/ Canada_Flag.dat (For CP Rail Station) Official SimCity Site For Both Stations: bldgprop_vol1.dat Official SimCity Site Vehicle_Props-V3.dat http://gizmo.lunarpages.com/ -------------------- I also used Havoc's Billboard Volume 3. The Bat files i used are included in the dat files. Installation Instructions

Check that you have all the files mentioned in the description. Apart from that I cannot help until I can download at a faster speed.

[AKPSV]

hi,
i have all Files checked an all dependencies installed. Here 2 images with the SC4 Tool.
I can not found the other files for the Lot.

Thanks

http://www.ld-host.de/show/178c34a17c3e38c56e9831f4e19a575b.jpg

http://www.ld-host.de/show/1c275f0fbe6ef3e3505ead3fae94dcf3.jpg

[ScottFTL]

I have all Files checked an all dependencies installed. Here 2 images with the SC4 Tool.  I can not found the other files for the Lot.

In all honesty, this lot may not be worth the trouble - but here's what I found.

According to the STEX description, you need the following dependencies:
     Gizmo's Vehichle Props-V3
     Gizmo's Namebrand Train Props-V3
     Gizmo's BN-Train Car Props-V2
     PEG CDK Seaport BRF Modded
     Marrast's rail station

You can find Gizmo's site HERE, but the problem is that most of the prop packs have been updated and are not compatible with earlier versions.  You'll need to find these exact versions, but I can't tell you where they are or if they are even still available.

The PEG Seaport is available, but it is not compatible with newer lots such as the BSC Functional Seaports.  You should NEVER install more than one seaport controller at a time.  The city will crash at best or be completely lost at worst, so please remember this warning!

I installed every dependency I have to test this lot, and it also found many unlisted dependencies:
   BSC Mikeseith Carprops Vol 01
   BSC MEGA Props - DAE Vol 01
   SG Models Grocery Stores
   CSX MEGA Props - Vol 06
Even with all these dependencies loaded, there are still many missing props and textures.  Unfortunately, this is the best I could do without access to the proper Gizmo packs.

I'd really recommend that you find another freight station to use, but hopefully this information will help if you really must have this one.  Remember, that you cannot install any custom seaports if you install the PEG Seaport dependency.

Good luck!

[Myself.or.?]

The PEG Seaport is available, but it is not compatible with newer lots such as the BSC Functional Seaports.  You should NEVER install more than one seaport controller at a time.  The city will crash at best or be completely lost at worst, so please remember this warning!

Sorry, you got me slightly confused here. I thought the problems between the various Seaports had been solved quite some time ago (http://sc4devotion.com/forums/index.php?topic=4969.80).
Does this mean we've got a new problem or didn't I understand something?

[ScottFTL]

Sorry, you got me slightly confused here. I thought the problems between the various Seaports had been solved quite some time ago (http://sc4devotion.com/forums/index.php?topic=4969.80).
Does this mean we've got a new problem or didn't I understand something?

No, it's not a new problem.  There can only be one master seaport controller, and unfortunately Pegasus seaports could not be included in the BSC Functional Seaports.  I believe that all other seaports have been included in the seaport controller installed with the BSC Functional Seaports.

I don't know if you are comfortable doing your own modding, but you only need the props included in that Pegasus seaport.  You can delete everything except the props using iLive Reader if you want to use another seaport but still have the required dependency.

[RippleJet]

Myself.or.?  ...  I'd recommend that you read this thread.